QAVLIRO™ Raven Gate Garden Hose Holder

QAVLIRO™ Raven Gate Garden Hose Holder

$58.96
Skip to product information
QAVLIRO™ Raven Gate Garden Hose Holder

QAVLIRO™ Raven Gate Garden Hose Holder

$58.96
QAVLIRO™ Outdoor Collection

A More Distinguished Place for the Garden Hose

The Raven Gate Garden Hose Holder turns everyday outdoor storage into an architectural accent. Its broad curved cradle helps keep a garden hose neatly supported, while the raven, crescent moon and Gothic arch add a quietly dramatic finish.

Up to 100 ft Designed for a standard 5/8 in garden hose*
Broad Cradle Rounded support helps reduce tight bends and kinks
Four-Point Mount Made for secure installation on a suitable structural surface
Form Meets Function

Order for the Hose. Character for the Wall.

Unlike a bulky reel, this stationary holder has no crank, drum or moving mechanism. Loop the hose over the deep cradle for simple storage beside a garden, garage or potting shed.

Insert 主图4 here — brick-wall installation scene
Raven Gate Details

Made to Look at Home After Sunset

Layered feather texture, a pointed arch and warm antique-brass accents give the holder a collected, old-world appearance without sacrificing its practical purpose.

Hose-Friendly Curve

A wide, rounded resting surface distributes the coil more evenly than a narrow hook.

Weather-Resistant Finish

The matte powder coating adds a protective exterior layer for normal residential outdoor use.

Reinforced Wall Plate

Structural ribs and four mounting points help transfer load to a properly prepared wall.

No Moving Parts

A straightforward stationary design means there is no reel mechanism to jam or maintain.

Materials & Construction

Built for Everyday Outdoor Organization

Main body Cast aluminum
Structural support Reinforced aluminum wall plate and integral ribs
Exterior finish Matte black weather-resistant powder coating
Decorative accents Antique-brass-tone finished metal details
Included hardware Four general-purpose screws and wall anchors. The installer must select fasteners appropriate for the actual wall material and load.
Material note: Minor texture and finish variation is normal for cast and hand-finished metal components.
Product Specifications

Sized for a Practical Garden Setup

Overall dimensions Approx. 17.5 W × 8.5 D × 13.5 H in (44.5 × 21.6 × 34.3 cm)
Product weight Approx. 5.8 lb (2.63 kg)
Recommended hose capacity Up to 100 ft of standard 5/8 in garden hose*
Recommended maximum load 35 lb (15.9 kg), evenly distributed, only when correctly mounted to suitable structural support*
Use Residential indoor or outdoor wall mounting
Mechanism Stationary cradle; this product is not a hose reel
Package includes 1 hose holder and 1 basic mounting-hardware set; garden hose not included
*Capacity depends on hose construction, coil diameter, wall condition and installation method. Verify final measurements, materials and tested load rating against the approved production sample before publishing.
Installation

A Secure Mount Begins with the Wall

Choose the location. Select a flat surface with adequate clearance and structural support.
Match the fasteners. Use hardware rated for the wall type—wood stud, masonry or another suitable substrate. Do not rely on decorative siding alone.
Level and mark. Hold the plate level, mark all mounting points and drill appropriate pilot holes.
Secure and test. Tighten all fasteners evenly, confirm the holder does not shift, then add the hose gradually.
Safety: Installation requirements vary. If the wall construction or fastener choice is uncertain, use a qualified installer. Keep children from climbing or hanging on the product.
Care Guide

Simple Care Through the Seasons

Routine cleaning Rinse away loose dirt, wipe with mild soap and water, then dry with a soft cloth.
Avoid Abrasive pads, harsh chemicals, pressure washing at close range and prolonged contact with road salt.
Finish care Inspect periodically. Touch up chips promptly with a compatible exterior metal coating to help limit corrosion at exposed areas.
Freezing weather Disconnect and drain the hose before freezing conditions; follow the hose manufacturer's winter-storage guidance.
A Practical Finishing Detail

Let the Garden Keep a Little Mystery

A durable home for the hose, shaped with the atmosphere of an old garden gate.

You may also like